Hard-Cut NG (Cutting Oil - Hard Cut)
You can download MSDS
sheets, Brochures & Reference Materials for this product if you are a
member of our site!
Click
here to find out the privileges of membership.
General Description
Hard Cut NG and NG CF are the Next Generation, hence “NG”, in the full line of straight oils developed, manufactured and offered by Hangsterfer’s. Hard Cut NG and NG CF are the most advanced straight oils on the market. No other competitive products can compare to the Hard Cut NG’s complexity. Hard Cut NG contains an infused combination of Synthetic and Vegetable compounds and derivatives. The infusion process results in the perfectly blended and aligned molecular structures, which allow for the lowest possible viscosity without compromise to lubricity or flash point levels.
Instructions
Please consult your local representative.
Maintenance
While straight cutting oils are not susceptible to the broad range of problems encountered with a water-based fluid, regular maintenance does improve their performance and extend their life. The Hard Cut oils are designed to reject foreign contaminants, such as metal fines. If the performance of the oil begins to deteriorate, remove the oil from the machine and allow settling in a drum or settling tank for 3-7 days.
Cleaning
All Hard Cut oils are formulated to minimize cleaning time. They are cleanable in both aqueous and solvent systems. For best results use a Hangsterfer’s Ozonic series cleaner or recommended aqueous cleaner. Both style cleaners work best at removing Hard Cuts when heated to 140°F (60°C).
The
general description, recommended uses, application data and
statements in the product literature are guidelines. Because this product may be used for a variety of
applications over which Hangsterfer’s Laboratories, Inc. has
no control, Hangsterfer’s Laboratories, Inc. assumes no
liability for incidental, consequential, or direct damages of
any kind, regardless of causes, including negligence.
|
