R-100 G (Coolant Concentrate - Synthetic)

You can download MSDS sheets, Brochures & Reference Materials for this product if you are a member of our site!  
Click here to find out the privileges of membership.

General Description

Hangsterfer’s R-100 G is a full synthetic machining and grinding coolant. The green transparent biostable formula offers extended sump life, reduced coolant consumption and minimal waste. R-100 G is free of oil and grease while remaining transparent in both hard and soft water. It provides a unique cleaning action to help reduce wheel loading and leaves behind a thin corrosion inhibiting film. It does not contain nitrite, nitrate, DEA or MEA.

Application

R-100 G is an excellent choice for general machining when a mineral oil free coolant is desired, especially on ferrous alloys such as cast iron. R-100 G is blended to provide maxium efficiency when machining and grinding a wide variety of materials including ferrous and non-ferrous.

Instructions

Always premix coolant before adding to the machine sump. When mixing coolant by hand it is important to always add the concentrate to the water, then agitate. For best results a Hangsterfer’s recommended proportioning unit should be used. Never add straight water or straight concentrate directly to the machine. It is best to add a dilution equal to half the recommended concentration in order to maintain fluid volume in the machine. For example, a 3% make-up concentration will be necessary to maintain a 6% concentration.

Maintenance

R-100 G is biostable and is designed to control the growth of bacteria and fungi without needing tank side additives. Regular maintenance is suggested for maximum performance. Concentration should be monitored regularly with a calibrated refractometer. The refractometer reading needs to be multiplied by 4 in order to determine the actual concentration (e.g. 1 on refrac. =4.0%). Tramp oils should be removed from the coolant surface regularly to prevent unwanted bacterial growth. Keep the coolant system free of cleaners, solvents and other contaminants.

Cleaning

Please consult your local representative.

The general description, recommended uses, application data and statements in the product literature are guidelines. Because this product may be used for a variety of applications over which Hangsterfer’s Laboratories, Inc. has no control, Hangsterfer’s Laboratories, Inc. assumes no liability for incidental, consequential, or direct damages of any kind, regardless of causes, including negligence.